1、 Routine maintenance of production equipment found a bad sign, immediately solve.
Vacuum coating machine do not think that this oil is regularly replaced, waiting for maintenance time, serious wear rotor pump may. For example, if some parts of the bearing are stuck on the rotor, replace the bearing and wait until it is completely broken, it is really a big problem. The coating machine may cause the motor of the rotor to burn down.
2、 Regular maintenance, coating machine someone will ask a daily maintenance also need regular maintenance? In fact, each equipment has its own life, such as 2 years of oil diffusion pump service life, early replacement, coating machine in the production stage no problem.
We want you to make the daily maintenance and regular maintenance, extend the service life of the equipment at the same time, greatly reduce the failure probability in the production process, and improve the production efficiency.
3、 Don't disassemble blindly.
The vacuum part of the coating machine problem is difficult, while many companies do not leak detectors and will gradually find them.
Why not go to vacuum
1. Maybe it's the leakage rate, which is what we often call leakage;
2. Perhaps the pumping capacity of the vacuum unit is not enough, pollution or oxidation;
3. May be a vacuum chamber too dirty air; Water leakage of coating machine
4. Vacuum chamber;
4、 Secondary pipeline leakage; Or possible problems, first judge according to the phenomenon, and then find problems according to the judgment, which can achieve twice the result with half the effort.
5、 Develop good hygiene habits. Coating machine dust removal equipment and peripheral equipment. Dust will produce static electricity and damage electronic components. Oil can make the conductor tube quench and crack, leading to some unexpected problems.