The so-called vacuum coating machine is a process of placing the material to be plated and the substrate to be plated in a vacuum chamber, heating the material to be plated by a certain method, making it evaporate or sublimate, and flying sputtering to the surface of the substrate to form a film.......

The coating materials used in vacuum plating are wide and easy to meet the requirements of environmental protection. To be simple, it is a surface treatment technology that the coating materials that need to be coated on the product surface are deposited on the workpiece surface after plasma ioni......

1. When the coating equipment completes more than 200 coating procedures, the working room should be cleaned once. The method is: repeatedly scrub the vacuum chamber wall with NaOH saturated solution (pay attention to that the human skin can not directly contact the NaOH solution to avoid burns).......

Automatic coating equipment system is an important part of vacuum coating equipment, which can greatly improve the performance index of vacuum automatic coating equipment. The commonly used automatic control systems of vacuum coating equipment include computer control system, relay control system......

In vacuum environment, the technology of heating and plating the material on the substrate is as followsVacuum coaterSpecifically,Vacuum coaterThe coating in vacuum evaporation is usually aluminum film, but other coatings can also be formed by evaporation deposition. However, the existing coating......

Vacuum coating machine mainly refers to a kind of coating equipment which needs to be carried out under high vacuum degree, including vacuum evaporation coating machine, vacuum multi arc ion plating machine, vacuum medium frequency magnetron sputtering coating machine, multi-functional if magnetr......

Many new users don't know how to operate the vacuum coater correctly; The normal operation of the machine, the vacuum coating machine to start the machine, you must first open the water pipe, should always pay attention to the working water pressure. At the same time, ion bombardment and evaporat......

1. Water electroplating: generally applicable to ABS material, ABS + PC material products. The main process is to put the product to be electroplated into the chemical plating solution for electroplating. According to the different needs of customers, it can be plated into different colors, such ......

1. The structural form of vacuum pipe and static sealing parts (flange, sealing ring, etc.) in the equipment shall comply with the provisions of GB / t6070. 2. The vacuum gauge shall be installed on the low vacuum and high vacuum pipes and the vacuum coating chamber to measure the vacuum degree o......